0.9mm non-adhesive Invisible transparent bare Optical Fiber cable for Indoor FTTR installation

Description

0.9mm non-adhesive invisible transparant bare Optical Fiber cable with G657A1 / G657A2 super bent insensitive fiber. The application of invisible optical cable is the application where the user does not accept the entry of the leather cable to the home or solves the problem of the user's difficulty in entering the home, especially in the old residential area and office. The optical fiber used is a G657A1 / G657A2 optical fiber with a small bending radius of 0.9mm. 

When laying, there is no need to nail, make brackets, perforate, make pipes, etc., to destroy the original indoor structure, or because of the discontinuity of laying, the optical cable will sag or fall off and other safety hazards. At the same time, because the optical cable is almost transparent, it will not affect the indoor Beautiful, simple construction method, only need hand-held glue gun installation tools to complete the laying project. Meanwhile, there is also 1.2mm adhesive invisible optical cable option

Feature

- The layers are tight and not separated, almost transparent;

- Special tight sleeve layer, good peelability;

- The outer surface is smooth, with no visible holes, scars and other defects;

- The small bending radius reaches, and there is no dead corner laying indoors;

- Hand-held laying tools, no complicated wiring methods, convenient and fast;

- Plug-in tools, resource saving, green and environmental protection.